P202 / P302 L-EFT set
Pulse Injection Langer Pulses 1.5/5 ns and 1.5/20 ns
Short description
The P202 and P302 pulse generators are used to determine an IC’s pulse immunity. During a Burst/ESD device test the generated pulse-shaped disturbances reach any ICs in the device under test. To individually test ICs, the pulse generators from LANGER EMV-Technik GmbH simulate these reduced disturbances and make it possible to analyse the immunity of each individual IC pin/ball during function.
The P202 pulse-current source was designed based on the mechanisms of magnetic-field disturbance coupling in electronic devices.
The P302 pulse-voltage source was designed based on the mechanisms of electric-field disturbance coupling in electronic devices.
The P202 and P302 pulse generators can only be operated with the BPS 202 burst power station.
Scope of delivery
- 1x P202 L-EFT, Pulse Current Generator Langer Pulse 1.5/5 ns
- 1x P302 L-EFT, Pulse Voltage Generator up to 500 V Langer Pulse 1.5/20 ns
- 1x BPS 202, Burst Power Station
- 1x BPS 202-Client, BPS 202-Client Software / USB
- 1x NT Ex EU, Power Supply Unit
- 1x SK FI-FI mini 7P 1 m, Control Cable, Fischer-Fischer
- 1x P200 / P300 case, System Case
- 1x P202 / P302 m, User manual
Recommended products
Scope of delivery details
-
P202 L-EFT
Pulse Current Generator Langer Pulse 1.5/5 ns
The P202 L-EFT pulse-current generator is used for the conductive coupling of disturbance pulses into test ICs. During tests according to the standards IEC 61000-4-2 / ICE 61000-4-4 the P202 simuates the reduced disturbance pulses that have reached the IC. These disturbance-current pulses created du…
-
P302 L-EFT
Pulse Voltage Generator up to 500 V Langer Pulse 1.5/20 ns
The P302 L-EFT pulse-voltage generator is used for the conductive coupling of disturbance pulses into test ICs. During tests according to the standards IEC 61000-4-2 / ICE 61000-4-4 the P302 simuates the reduced disturbance pulses that have reached the IC. These disturbance-voltage pulses created du…
-
BPS 202
Burst Power Station
The BPS 202 is used as power supply and control unit for the Langer EMV-Technik GmbH pulse probes. The control unit is connected to the user PC via an USB interface. BPS 202-Client software does the controlling. With the BPS 202 input "sync" interference pulses of the connected probes can be synchro…
-
BPS 202-Client
BPS 202-Client Software / USB
The BPS 202-Client software is used to control the BPS 202 Burst Power Station and thereby the connected probe. The software is installed on the user PC.