OB 100 set
Opto-Box 100 LIN and CAN
-
-
Application of OB 100 set -
Scope of delivery OB 100 set
Short description
The Opto-Box 100 converts electrical CAN or LIN signals into optical signals.
By using two Opto-Box 100, it is easy to split up an existing cable connection and replace a section of the cable with a fiber optic connection.
By combining the OB 100 with a LIN 100 or CAN 100 sensor, a very high disturbance immunity of the respective signal connection can be achieved.
Scope of delivery
- 2x OB 100, Opto-Box 100
- 1x CAN 100, Optical Fiber Probe
- 4x Adapter Socket, 4-poles, Adapter Socket, 4-Pole
- 1x LIN 100, Optical Fiber Probe
- 4x Adapter Socket, 3-poles, Adapter Socket, 3-Pole
- 1x LWL double 10 m, Optical Fiber, Double 10 m
- 1x Wire CuL, Enamelled Copper Wire
- 1x NT Ex EU, Power Supply Unit
- 1x OB 100 set m, User manual
- 1x A4 case, System Case
Technical parameters
| Operating time with charged internal batteries | up to 1 week (depending on operating mode) |
| Supply voltage | 12 V (max. 25 V) |
| max. current input at 12 V | 250 mA (while charging internal battery) 45 mA (without charging internal battery) |
| Optical fibre connector | 2 x 2.2 mm Ø |
| Optical fibre length | 20 m (6 m at 1 Mbit/s CAN) |
Scope of delivery details
-
OB 100
Opto-Box 100
The OB 100 Opto Box is used for optical signal transmission according to CAN- and LIN-standard (change-over switch). Via fibre optical cable the optical signals are transmitted to the distant station (either LIN 100 or CAN 100 probe head or a second Opto-Box). The LIN- or CAN-signals can be injected…
-
CAN 100
Optical Fiber Probe
The CAN 100 optical fiber probe facilitates potential free signal transmission according to CAN standards. The very small probe head is installed directly into the assembly. The bidirectional optical transmission path achieved through the double-plastic optical fiber cable is suitable for the signal…
-
LIN 100
Optical Fiber Probe
The LIN 100 optical fiber field bus allows for potential free signal transmission according to LIN standards. The very small probe head is installed directly in the assembly. The bidirectional optical transmission path achieved through a double-plastic optical fibre cable is suitable for the signal …
-
LWL double 10 m
Optical Fiber, Double 10 m
The LWL Ø 2.2 mm 10 m is a double channel flexible fiber cable for optical signal transmission.