• Contact us
  • Career
  • Terms and Conditions
  • Payment form
  • DE
  • EN
  • CN

Black cat logo Langer EMV-Technik

  • About us
    • Company
      • Career
      • Terms and Conditions
      • Company Profile
      • Milestones
    • Distributors
      • Asia
      • Europe
      • North America
    • Contact us
    • Map and Travel Information
    • Sponsoring
    • Events
    • Payment form
  • Products
    • PCB Immunity
      • Immunity Development System
      • Mini Burst Field Generators
      • Accessory EFT/Burst generators IEC 61000-4-4
      • Optical Signal Transmission
      • Burstdetector
    • PCB Emission
      • Measurement Technology for the Development Stage
      • Near-Field Probes
      • Preamplifier
      • Near-Field Microprobes
      • Optical Signal Transmission
    • IC Test System
      • IC Test Environment
      • Emission
      • Immunity
      • Simulation
    • IC Security
      • Fault Injection
      • Side-channel analysis
      • Positioning systems
    • Positioning Systems
      • Langer Scanner
      • Accessories for Langer Scanner
      • Near-field Scanner Probes
    • Software
      • CS-Scanner, ChipScan-Scanner Software / USB
      • CS-ESA set, ChipScan-ESA Software / USB
    • Measuring and Calibration Stations
      • PCB
      • IC
      • Connector
    • Equipment for Teaching and Training
      • EMC-Basic 1 set, Demonstration Boards Mini Burst Field Generators
      • EMC-Basic 2 set, Demonstration Boards Near-Field Probes
      • DB 20 set, Demo Board 20
      • D10 set, EMC Demonstration Board
  • Seminars
    • SF-GE, Experimental EMC Seminar - Interference Immunity - Basics & Troubleshooting (3 days)
    • SA-GE, Experimental EMC Seminar - Interference Emission - Basics and Troubleshooting (3 days)
    • SF IHS, Experimental EMC In-house Seminar - Immunity 3 days
    • SA IHS, Experimental EMC In-house Seminar - Emission 3 days
    • Dates Overview
  • Services
    • EMC Workshops
    • IC-EMC Analysis
      • Emission
      • Immunity
    • EMC Analysis
      • SMM Langer, Measuring of electromagnetic Shielding according to Langer method
      • COCI, Measurement of the Coupling Inductance of Connectors and Cables
    • EMV-B, EMC-Consulting / Hour
  • EMC Know-How
    • Downloads
    • Technical article Board-EMC
      • Basic Knowledge
      • Immunity
      • Emission
    • Technical article IC-EMC
      • Basic Knowledge
      • Immunity
      • Emission
    • Langer EMV-Technik in scientific research
    • Newsletter
      • 17 ESA1 set
      • 16 ICI-DP sets
      • 15 tent and GP 23 set
      • 14 Mini Burst Field Generators in pocket size
      • 13 Achieve interference immunity by identifying and eliminating EMC weak points:
      • 12 ICR: Near-field analysis in the micrometer range and its advantages
      • 11 ChipSan-ESA now supports more measuring devices
      • 10 P512 and DPI
      • 09 Surface Scan on IC Level with high Resolution
      • 08 ESD and Efficient Electronic Design
      • 07 EMC Measurement Technology for Testing Integrated Circuits - An Introduction
      • 06 Measuring the Shielding Effectiveness at IC Level with the IC Test System P1402/P1502
      • 05 Time and cost savings when recording and documenting RF measurements with a spectrum analyzer
      • 04 Radiated Emissions at the PCB Level - An Introduction
      • 03 Interference suppression on a direct-current motor controlled by PWM
      • 02 XF sniffer probes and LVDS suppression
      • 01 MFA micro probes and LVDS suppression
    • Videos
      • How-to videos
      • EMC Webinar
  • PCB Immunity
    • Immunity Development System
      • E1 setImmunity Development System
      • S2 setMagnetic Field Probes for E1
      • E2 setTS 23 Immunity Development System
    • Mini Burst Field Generators
    • Accessory EFT/Burst generators IEC 61000-4-4
    • Optical Signal Transmission
    • Burstdetector
  • PCB Emission
  • IC Test System
  • IC Security
  • Positioning Systems
  • Software
  • Measuring and Calibration Stations
  • Equipment for Teaching and Training
  • Products
  • PCB Immunity
  • Immunity Development System
  • E2 set, TS 23 Immunity Development System
  • TS 23, Pulse Generator

TS 23

Pulse Generator

  • Short description
  • Technical parameters
Send enquiry Datasheet
  • TS 23, Pulse Generator
TS 23, Pulse Generator
Short description

The TS 23 is a generator for disturbing electronic devices with voltage pulses. The TS 23 has symmetrical and galvanically isolated outputs.

The pulses generated by the disturbance generator are characterized by a rise time of 1.5 ns, a pulse width of 12 ns and a pulse voltage from 10 V up to 2.2 kV. The maximum repetition frequency of the pulses for continuous pulsing is 1.5 kHz. In addition, Pulse Groups with a number of 1 - 50 pulses can be generated at the output of the generator. The modulator integrated in the generator can further generate different variations in the pulse height, for example a voltage ramp. The polarity of the pulses can be reversed with a switch. A pulse rate counter with an optical input which detects signals from assemblies is integrated into the TS 23. The TS 23 is the main component of the E2 set.

Technical parameters
Device functionality:
Operating Modes Continuous, Ramp, Pulse Groups, External Trigger
Pulse parameter
Rise time 1.5 ns
Max. Pulse voltage 2.2 kV (adjustable)
Polarity +/- (adjustable)
Pulse repetition frequency max. 1.5 kHz (adjustable)
Connector SMB
Optical input
Optical fiber 2.2 mm
Max. frequency 5 MHz
Min. pulse width 100 ns
Supply voltage 24 V / 1 A DC
Weight 850 g
Sizes (L x W x H) (160 x 200 x 75) mm
  • © Langer EMV-Technik
  • Contact us
  • Legal notice
  • Privacy policy
  • Sponsoring
  • YouTube
  • Linked-In
Europäischer Fonds für regionale Entwicklung EFRE - Europäischer Sozialfonds ESF